Supplies hub
HP DesignJet T795 Ink & Paper
Everything that fits the HP DesignJet T795 in one place — 14 ink cartridges, 3 printheads, 87 paper & media options, 2 accessories. Cartridges and printheads come from the manufacturer's own supply listing for this model; the paper list is resolved from the machine's published media handling, not a marketing list.
- Roll widthup to 44 in
- Core3 in
- Max roll dia.134.9 mm
- InkAqueous (dye + pigment)
The machine: HP DesignJet T795 1118mm Printer
HP DesignJet T795 Ink Cartridges
The HP DesignJet T795 runs aqueous (dye + pigment) ink. Only the cartridges the manufacturer lists for this model appear here.
40 ml5
130 ml9Add all 6 to cart $737.70
HP 72 130-ml Cyan Ink Cartridge
HP 72 130-ml Gray Ink Cartridge
HP 72 130-ml Magenta Ink Cartridge
HP 72 130-ml Matte Black Ink Cartridge
HP 72 130-ml Photo Black Ink Cartridge
HP 72 130-ml Yellow Ink Cartridge
HP 72B 130-ml Gray Ink Cartridge
HP 72B 130-ml Matte Black Ink Cartridge
HP 72B 130-ml Photo Black Ink CartridgePaper & Media for the HP DesignJet T795
The recommended and compatible rolls below were checked against the HP DesignJet T795's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. This machine takes rolls up to 44 in wide on 3 in cores.
Recommended for this printer
Representative image10 Mil Water-resistant Blockout Display Film- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative image11 Mil Water-Resistant Synthetic Banner- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 3" core supported
- 11.0 mil caliper within this printer's media path
Representative image180gsm Solvent Satin PE Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 36–44" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
Representative image200gsm Special Matte Photo Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 9.0 mil caliper within this printer's media path
Representative image5 Mil Polycarbonate Laminate- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 38–44" rolls this printer accepts
- 3" core supported
- 5.0 mil caliper within this printer's media path
Representative image10 Mil Water-resistant Blockout Display Film- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative imageMagic 10mil Gloss Microporous Photo Paper (SIENA250G)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative image24LB Inkjet Bond Paper (731)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 11–44" rolls this printer accepts
- 3" core supported
- 4.7 mil caliper within this printer's media path
- fits in up to 150 ft lengths; longer rolls exceed the 5.3 in roll this printer holds
Representative imagePoly Fabric- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 36–44" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
Representative imageMagic 8mil Microporous Gloss Photo Paper (SIENA200G)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
Representative imageMagic Cotton Textured Rag 285 (VERONA285T)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 16.5 mil caliper within this printer's media path
Representative imageMagic 230gsm Premium Matte Paper (PHOTOART230)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 10.5 mil caliper within this printer's media path
Representative imageMagic 10mil Satin Microporous Photo Paper (SIENA250L)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 17–44" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative imageMagic 15mil Matte Coated Scrim Vinyl Banner (DMVB2)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 3" core supported
- 15.0 mil caliper within this printer's media path
Representative imageKODAK PROFESSIONAL Inkjet Photo Paper, Glossy / 255g- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 17–44" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative imageKODAK PROFESSIONAL Inkjet Photo Paper, Matte / 230g- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 17–44" rolls this printer accepts
- 3" core supported
- 9.5 mil caliper within this printer's media path
Representative imageMagic Firenze 132gsm Coated Matte Paper (Firenze132)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 3" core supported
- 6.5 mil caliper within this printer's media path
- fits in up to 100 ft lengths; longer rolls exceed the 5.3 in roll this printer holds
Representative image180gsm Solvent Satin PE Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 36–44" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
48 more recommended rolls fit this machine — browse all paper & media.
Also stocked for this machine
These come from the supply list wired to this machine rather than the media-handling match, so there is no per-roll fit note to show.
Also compatible
These load and run, but the coating is not the manufacturer's optimal match for this ink.
Representative image20LB Engineering Bond Paper (430)- coating rated for both the dye colour and pigment black this printer uses
- available in 11–44" rolls this printer accepts
- 3" core supported
- 4.0 mil caliper within this printer's media path
- fits in up to 250 ft lengths; longer rolls exceed the 5.3 in roll this printer holds
Representative imageKODAK Photo Tex Repositionable Fabric / Aqueous- coating rated for both the dye colour and pigment black this printer uses
- available in 24–44" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- vendor rates this coating compatible, not optimal, for this ink
HP Professional Matte Canvas- coating rated for both the dye colour and pigment black this printer uses
- available in 24–44" rolls this printer accepts
- 3" core supported
- 18.0 mil caliper within this printer's media path
- vendor rates this coating compatible, not optimal, for this ink
Representative imageKODAK PROFESSIONAL Inkjet Artist Canvas, Matte Finish / 410g- coating rated for both the dye colour and pigment black this printer uses
- available in 17–44" rolls this printer accepts
- 3" core supported
- 18.0 mil caliper within this printer's media path
- vendor rates this coating compatible, not optimal, for this ink
Representative imagePaperTyger 53# PaperTyger Laser/Inkjet (470)- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 3" core supported
- 9.0 mil caliper within this printer's media path
Representative image10 Mil Polycarbonate Laminate- coating rated for both the dye colour and pigment black this printer uses
- available in 38–44" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- fits in up to 75 ft lengths; longer rolls exceed the 5.3 in roll this printer holds
- vendor rates this coating compatible, not optimal, for this ink
HP Professional Satin Photo Paper- coating rated for both the dye colour and pigment black this printer uses
- available in 36–44" rolls this printer accepts
- 3" core supported
- 9.8 mil caliper within this printer's media path
- vendor rates this coating compatible, not optimal, for this ink
Representative imagePaperTyger 27# PaperTyger Laser/Inkjet (467)- coating rated for both the dye colour and pigment black this printer uses
- available in 24–42" rolls this printer accepts
- 3" core supported
- 4.5 mil caliper within this printer's media path
- fits in up to 200 ft lengths; longer rolls exceed the 5.3 in roll this printer holds
Representative image4mil DM Inkjet Film (7924D)- coating rated for both the dye colour and pigment black this printer uses
- available in 18–42" rolls this printer accepts
- 3" core supported
- 4.0 mil caliper within this printer's media path
Printheads
Accessories
Frequently asked questions
- Which ink cartridges fit the HP DesignJet T795?
- The HP DesignJet T795 takes HP 72 130-ml Cyan DesignJet Ink Cartridge, HP 72 130-ml Gray Ink Cartridge, HP 72 130-ml Magenta Ink Cartridge, HP 72 130-ml Matte Black DesignJet Ink Cartridge, HP 72 130-ml Photo Black Ink Cartridge, HP 72 130-ml Yellow DesignJet Ink Cartridge, HP 727 Cyan Ink Cartridge, 40 ml (B3P13A), HP 727 Gray Ink Cartridge, 40 ml (B3P18A), HP 727 Magenta Ink Cartridge, 40 ml (B3P14A) and HP 727 Photo Black Ink Cartridge, 40 ml (B3P17A) and 4 other genuine cartridges. Every cartridge listed on this page comes from the manufacturer's supply listing for this model.
- What roll widths and core sizes does the HP DesignJet T795 take?
- It takes rolls up to 44 in wide on 3 in cores. The spindle holds a finished roll up to 134.9 mm in diameter, which is what separates a 150 ft roll from a 300 ft roll of the same paper.
- Does the HP DesignJet T795 use dye or pigment ink?
- The HP DesignJet T795 runs aqueous (dye + pigment) ink. This machine runs a mixed set — pigment for durability in some channels, dye for colour reach in others.
- What paper can I use in the HP DesignJet T795?
- We hold 87 paper and media products verified against this machine, 66 of them at the recommended tier, where compatibility is resolved from the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. The rest come from the supply list the manufacturer publishes for this machine. Either way a roll only appears here if a source says it fits.
- Do you sell printheads for the HP DesignJet T795?
- Yes — 3 genuine printhead products for this model are listed above. If you are not sure which channel has failed, call 980-536-0080 and we will work it out from the machine's error code.
Not sure which supply you need?
Tell us the model and what you are printing and we will confirm the right cartridge or roll before you order. Call 980-536-0080 or send us the details.
Red Circle Solutions LLC · 110 Exmore Rd Suite 2, Mooresville NC 28117









