Supplies hub
HP DesignJet T3500 MFP Ink & Paper
Everything that fits the HP DesignJet T3500 MFP in one place — 9 ink cartridges, 99 paper & media options, 2 accessories. Cartridges and printheads come from the manufacturer's own supply listing for this model; the paper list is resolved from the machine's published media handling, not a marketing list.
- Roll width11–36 in
- Core3 in
- Max roll dia.180 mm
- InkAqueous (dye + pigment)
The machine: HP DesignJet T3500 MFP 36-in
HP DesignJet T3500 MFP Ink Cartridges
The HP DesignJet T3500 MFP runs aqueous (dye + pigment) ink. Only the cartridges the manufacturer lists for this model appear here.
HP 764 300-ml Cyan Ink Cartridge
HP 764 300-ml Gray Ink Cartridge
HP 764 300-ml Magenta Ink Cartridge
HP 764 300-ml Matte Black Ink Cartridge
HP 764 300-ml Photo Black Ink Cartridge
HP 764 300-ml Yellow Ink Cartridge
HP 764B 300-ml Gray Ink Cartridge
HP 764B 300-ml Matte Black Ink Cartridge
HP 764B 300-ml Photo Black Ink CartridgePaper & Media for the HP DesignJet T3500 MFP
The recommended and compatible rolls below were checked against the HP DesignJet T3500 MFP's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. This machine takes rolls 11–36 in wide on 3 in cores.
Recommended for this printer
Representative image10 Mil Water-resistant Blockout Display Film- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative image15 Mil Water-Resistant Econo Scrim Vinyl- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 15.0 mil caliper within this printer's media path
Representative image180gsm Solvent Satin PE Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 8.0 mil caliper within this printer's media path
Representative image200gsm Special Matte Photo Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 9.0 mil caliper within this printer's media path
Representative image5 Mil Water-Resistant Self-Adh Vinyl (3" AC)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 5.0 mil caliper within this printer's media path
Representative image180gsm Solvent Satin PE Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 8.0 mil caliper within this printer's media path
Representative image10 Mil Water-resistant Blockout Display Film- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative imageEveryday Proofing (GRACoL 2013) (EV260)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative imageMagic 6mil PP Film w/ Low-Tack Adhesive (STICK2)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative imageMagic 230gsm Premium Matte Paper (PHOTOART230)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 10.5 mil caliper within this printer's media path
Representative image24LB Inkjet Bond Paper (731)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 11–36" rolls this printer accepts
- 3" core supported
- 4.7 mil caliper within this printer's media path
Representative imagePoly Fabric- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 8.0 mil caliper within this printer's media path
Representative imageMagic 10mil Satin Microporous Photo Paper (SIENA250L)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 17–36" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
HP Production Gloss Photo Paper, 3-in. Core- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
Representative imageMagic 10mil Gloss Microporous Photo Paper (SIENA250G)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
Representative image8 Mil Water-Resistant Polypropylene- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
Representative imagePremium Proofing (FOGRA) (EV270)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
HP Permanent Gloss Adhesive Vinyl- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 3.0 mil caliper within this printer's media path
48 more recommended rolls fit this machine — browse all paper & media.
Also stocked for this machine
These come from the supply list wired to this machine rather than the media-handling match, so there is no per-roll fit note to show.
Also compatible
These load and run, but the coating is not the manufacturer's optimal match for this ink.
HP Premium Bond Paper, 3-in Core- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 3" core supported
- 5.6 mil caliper within this printer's media path
Representative image20LB Engineering Bond Paper (430)- coating rated for both the dye colour and pigment black this printer uses
- available in 11–36" rolls this printer accepts
- 3" core supported
- 4.0 mil caliper within this printer's media path
Representative imageKODAK Photo Tex Repositionable Fabric / Aqueous- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- vendor rates this coating compatible, not optimal, for this ink
Representative imageHP 20-lb Bond with ColorPRO Technology, 72 RL Tub- coating rated for both the dye colour and pigment black this printer uses
- available in 17–18" rolls this printer accepts
- 3" core supported
- 4.0 mil caliper within this printer's media path
Representative imagePaperTyger 53# PaperTyger Laser/Inkjet (470)- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 3" core supported
- 9.0 mil caliper within this printer's media path
HP Professional Matte Canvas- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 3" core supported
- 18.0 mil caliper within this printer's media path
- vendor rates this coating compatible, not optimal, for this ink
Representative imageHP 20-lb Bond with ColorPRO Technology, 36 Roll Tub- coating rated for both the dye colour and pigment black this printer uses
- available in 30–36" rolls this printer accepts
- 3" core supported
- 4.0 mil caliper within this printer's media path
HP Professional Satin Photo Paper- coating rated for both the dye colour and pigment black this printer uses
- available as 36" roll
- 3" core supported
- 9.8 mil caliper within this printer's media path
- vendor rates this coating compatible, not optimal, for this ink
Representative imageKODAK PROFESSIONAL Inkjet Artist Canvas, Matte Finish / 410g- coating rated for both the dye colour and pigment black this printer uses
- available in 17–36" rolls this printer accepts
- 3" core supported
- 18.0 mil caliper within this printer's media path
- vendor rates this coating compatible, not optimal, for this ink
Accessories
Coverage & Support
Frequently asked questions
- Which ink cartridges fit the HP DesignJet T3500 MFP?
- The HP DesignJet T3500 MFP takes HP 764 300-ml Cyan Ink Cartridge, HP 764 300-ml Gray DesignJet Ink Cartridge, HP 764 300-ml Magenta Ink Cartridge, HP 764 300-ml Matte Black Ink Cartridge, HP 764 300-ml Photo Black DesignJet Ink Cartridge, HP 764 300-ml Yellow DesignJet Ink Cartridge, HP 764B 300-ml Gray DesignJet Ink Cartridge, HP 764B 300-ml Matte Black DesignJet Ink Cartridge and HP 764B 300-ml Photo Black DesignJet Ink Cartridge. Every cartridge listed on this page comes from the manufacturer's supply listing for this model.
- What roll widths and core sizes does the HP DesignJet T3500 MFP take?
- It takes rolls 11–36 in wide on 3 in cores. The spindle holds a finished roll up to 180 mm in diameter, which is what separates a 150 ft roll from a 300 ft roll of the same paper.
- Does the HP DesignJet T3500 MFP use dye or pigment ink?
- The HP DesignJet T3500 MFP runs aqueous (dye + pigment) ink. This machine runs a mixed set — pigment for durability in some channels, dye for colour reach in others.
- What paper can I use in the HP DesignJet T3500 MFP?
- We hold 99 paper and media products verified against this machine, 66 of them at the recommended tier, where compatibility is resolved from the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. The rest come from the supply list the manufacturer publishes for this machine. Either way a roll only appears here if a source says it fits.
- How do you know these supplies fit the HP DesignJet T3500 MFP?
- Nothing on this page is matched by model name alone: the cartridges and printheads come from the manufacturer's own published supply listing for this exact model and each paper and media roll is checked against the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. If a part is not listed here, it has not been verified for this machine — call 980-536-0080 and we will check it before you order.
Not sure which supply you need?
Tell us the model and what you are printing and we will confirm the right cartridge or roll before you order. Call 980-536-0080 or send us the details.
Red Circle Solutions LLC · 110 Exmore Rd Suite 2, Mooresville NC 28117


