Supplies hub
HP DesignJet T1100 MFP Ink & Paper
Everything that fits the HP DesignJet T1100 MFP in one place — 14 ink cartridges, 3 printheads, 185 paper & media options, 1 accessory. Cartridges and printheads come from the manufacturer's own supply listing for this model; the paper list is resolved from the machine's published media handling, not a marketing list.
- Roll widthup to 44 in
- Max roll dia.135.9 mm
- InkAqueous (dye + pigment)
The machine: HP DesignJet T1100 MFP
HP DesignJet T1100 MFP Ink Cartridges
The HP DesignJet T1100 MFP runs aqueous (dye + pigment) ink. Only the cartridges the manufacturer lists for this model appear here.
HP 72 130-ml Cyan Ink Cartridge
HP 72 130-ml Gray Ink Cartridge
HP 72 130-ml Magenta Ink Cartridge
HP 72 130-ml Matte Black Ink Cartridge
HP 72 130-ml Photo Black Ink Cartridge
HP 72 130-ml Yellow Ink Cartridge
HP 72B 130-ml Gray Ink Cartridge
HP 72B 130-ml Matte Black Ink Cartridge
HP 72B 130-ml Photo Black Ink Cartridge
HP Premium Gloss 1067 mm x 30.5 m (42 in x 100 ft) White
HP Premium Gloss 610 mm x 15.2 m (24 in x 50 ft)
HP Premium Gloss 914 mm x 22.9 m (36 in x 75 ft)
HP Premium Matte White
HP Premium Plus Gloss 610 mm x 15.2 m (24 in x 50 ft) WhitePaper & Media for the HP DesignJet T1100 MFP
The recommended and compatible rolls below were checked against the HP DesignJet T1100 MFP's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. This machine takes rolls up to 44 in wide.
Recommended for this printer
Representative image10 Mil Water-resistant Blockout Display Film- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image180gsm Solvent Satin PE Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 36–44" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image200gsm Special Matte Photo Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- 9.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image380g Premium Matte Poly/Cotton Canvas- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 36–44" rolls this printer accepts
- 2" core supported
- 18.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image8 Mil Microporous Gloss Self-Adhesive Polypropylene- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 2" core supported
- 7.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image10 Mil Water-resistant Blockout Display Film- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image180gsm Solvent Satin PE Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 36–44" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageEveryday Proofing (GRACoL 2013) (EV260)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageHP Bright White Inkjet Paper, 2-pack- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 2" core supported
- 4.7 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image24LB Inkjet Bond Paper (731)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 11–44" rolls this printer accepts
- 2/3" core supported
- 4.7 mil caliper within this printer's media path
- fits in 150 ft and 300 ft lengths; longer rolls exceed the 5.4 in roll this printer holds
- core sizes derived from printer class, not yet verified
Representative imageMagic 230gsm Premium Matte Paper (PHOTOART230)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- 10.5 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageMagic 10mil Satin Microporous Photo Paper (SIENA250L)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 17–44" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imagePoly Fabric- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 36–44" rolls this printer accepts
- 2/3" core supported
- 8.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
HP Permanent Gloss Adhesive Vinyl- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 36–44" rolls this printer accepts
- 3" core supported
- 3.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageMagic 8mil Microporous Gloss Photo Paper (SIENA200G)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageMagic 6mil PP Film w/ Low-Tack Adhesive (STICK2)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageMagic 6mil Matte Coated Vinyl w/ Permanent Adhesive (DMVLA5)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 3" core supported
- 13.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image8 Mil Water-Resistant Polypropylene- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–44" rolls this printer accepts
- 2/3" core supported
- 8.0 mil caliper within this printer's media path
- fits in up to 100 ft lengths; longer rolls exceed the 5.4 in roll this printer holds
- core sizes derived from printer class, not yet verified
76 more recommended rolls fit this machine — browse all paper & media.
Also stocked for this machine
These come from the supply list wired to this machine rather than the media-handling match, so there is no per-roll fit note to show.
Also compatible
These load and run, but the coating is not the manufacturer's optimal match for this ink.
Representative image20LB Engineering Bond Paper (430)- coating rated for both the dye colour and pigment black this printer uses
- available in 11–44" rolls this printer accepts
- 3" core supported
- 4.0 mil caliper within this printer's media path
- fits in up to 250 ft lengths; longer rolls exceed the 5.4 in roll this printer holds
- core sizes derived from printer class, not yet verified
Representative imageKODAK Photo Tex Repositionable Fabric / Aqueous- coating rated for both the dye colour and pigment black this printer uses
- available in 24–44" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
- vendor rates this coating compatible, not optimal, for this ink
Representative imagePaperTyger 53# PaperTyger Laser/Inkjet (470)- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 3" core supported
- 9.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
HP Professional Matte Canvas- coating rated for both the dye colour and pigment black this printer uses
- available in 24–44" rolls this printer accepts
- 2/3" core supported
- 18.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
- vendor rates this coating compatible, not optimal, for this ink
HP Professional Satin Photo Paper- coating rated for both the dye colour and pigment black this printer uses
- available in 36–44" rolls this printer accepts
- 3" core supported
- 9.8 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
- vendor rates this coating compatible, not optimal, for this ink
Representative imageKODAK PROFESSIONAL Inkjet Artist Canvas, Matte Finish / 410g- coating rated for both the dye colour and pigment black this printer uses
- available in 17–44" rolls this printer accepts
- 2/3" core supported
- 18.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
- vendor rates this coating compatible, not optimal, for this ink
HP Everyday Satin Photo Paper- coating rated for both the dye colour and pigment black this printer uses
- available in 36–44" rolls this printer accepts
- 3" core supported
- 7.4 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
- vendor rates this coating compatible, not optimal, for this ink
Representative imageKODAK Rapid-Dry Photographic Satin Paper 190g (8 Mil)- coating rated for both the dye colour and pigment black this printer uses
- available in 24–44" rolls this printer accepts
- 2" core supported
- 8.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
- vendor rates this coating compatible, not optimal, for this ink
Representative image18LB Engineering Bond Paper (Translucent) (450)- coating rated for both the dye colour and pigment black this printer uses
- available in 15–36" rolls this printer accepts
- 2/3" core supported
- 2.9 mil caliper within this printer's media path
- fits in 500 ft lengths; longer rolls exceed the 5.4 in roll this printer holds
- core sizes derived from printer class, not yet verified
Printheads
Accessories
Coverage & Support
Frequently asked questions
- Which ink cartridges fit the HP DesignJet T1100 MFP?
- The HP DesignJet T1100 MFP takes HP 72 130-ml Cyan DesignJet Ink Cartridge, HP 72 130-ml Gray Ink Cartridge, HP 72 130-ml Magenta Ink Cartridge, HP 72 130-ml Matte Black DesignJet Ink Cartridge, HP 72 130-ml Photo Black Ink Cartridge, HP 72 130-ml Yellow DesignJet Ink Cartridge, HP 72B 130-ml Gray DesignJet Ink Cartridge, HP 72B 130-ml Matte Black DesignJet Ink Cartridge, HP 72B 130-ml Photo Black DesignJet Ink Cartridge and HP Premium Gloss 1067 mm x 30.5 m (42 in x 100 ft) White and 4 other genuine cartridges. Every cartridge listed on this page comes from the manufacturer's supply listing for this model.
- What roll widths and core sizes does the HP DesignJet T1100 MFP take?
- It takes rolls up to 44 in wide. The spindle holds a finished roll up to 135.9 mm in diameter, which is what separates a 150 ft roll from a 300 ft roll of the same paper.
- Does the HP DesignJet T1100 MFP use dye or pigment ink?
- The HP DesignJet T1100 MFP runs aqueous (dye + pigment) ink. This machine runs a mixed set — pigment for durability in some channels, dye for colour reach in others.
- What paper can I use in the HP DesignJet T1100 MFP?
- We hold 185 paper and media products verified against this machine, 94 of them at the recommended tier, where compatibility is resolved from the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. The rest come from the supply list the manufacturer publishes for this machine. Either way a roll only appears here if a source says it fits.
- Do you sell printheads for the HP DesignJet T1100 MFP?
- Yes — 3 genuine printhead products for this model are listed above. If you are not sure which channel has failed, call 980-536-0080 and we will work it out from the machine's error code.
Not sure which supply you need?
Tell us the model and what you are printing and we will confirm the right cartridge or roll before you order. Call 980-536-0080 or send us the details.
Red Circle Solutions LLC · 110 Exmore Rd Suite 2, Mooresville NC 28117






