Supplies hub
HP Latex FS60 Ink & Paper
Everything that fits the HP Latex FS60 in one place — 14 ink cartridges, 1 printhead, 130 paper & media options, 9 accessories. Cartridges and printheads come from the manufacturer's own supply listing for this model; the paper list is resolved from the machine's published media handling, not a marketing list.
- Roll widthup to 126 in
- Max roll dia.400 mm
- InkLatex
The machine: HP Latex FS60 Printer
HP Latex FS60 Ink Cartridges
The HP Latex FS60 runs latex ink. Only the cartridges the manufacturer lists for this model appear here.
HP 883 5-liter Black Latex Ink Cartridge
HP 883 5-liter Cyan Latex Ink Cartridge
HP 883 5-liter Light Cyan Latex Ink Cartridge
HP 883 5-liter Light Magenta Latex Ink Cartridge
HP 883 5-liter Magenta Latex Ink Cartridge
HP 883 5-liter Optimizer Latex Ink Cartridge
HP 883 5-liter Overcoat Latex Ink Cartridge
HP 883 5-liter Yellow Latex Ink Cartridge
HP 883M 5-liter Magenta Latex Ink Cartridge
HP Latex 2700/FS Ink Collector Foams Kit
HP Latex 2700/FS Ink Collector Kit
HP Latex FS High Capacity Ink Kit
HP Latex FS Series High Capacity Ink Upgrade
HP Latex In-Line SlittersPaper & Media for the HP Latex FS60
The recommended and compatible rolls below were checked against the HP Latex FS60's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. This machine takes rolls up to 126 in wide.
Recommended for this printer
Representative image10 Mil Water-resistant Blockout Display Film- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image11 Mil Water-Resistant Synthetic Banner- coating rated BEST for latex ink
- available in 24–60" rolls this printer accepts
- 2/3" core supported
- 11.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image15 Mil Textured Co-polymer Laminate- coating rated BEST for latex ink
- available as 51" roll
- 3" core supported
- 15.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image180gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–61" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image200gsm Special Matte Photo Paper- coating rated BEST for latex ink
- available in 24–36" rolls this printer accepts
- 3" core supported
- 9.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image225gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–54" rolls this printer accepts
- 3" core supported
- 9.5 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageEmbossed Indoor Floor & Wall Vinyl- coating rated BEST for latex ink
- available as 54" roll
- 3" core supported
- 5.9 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image5 Mil Water-Resistant Self-Adhesive Vinyl (3" AC)- coating rated BEST for latex ink
- available as 60" roll
- 2/3" core supported
- 5.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image10 Mil Water-resistant Blockout Display Film- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageKODAK Premium Textured Display Film- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- 13.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageMagic 230gsm Premium Matte Paper (PHOTOART230)- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- 10.5 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageMagic 15mil Poly-Cotton Satin Canvas (GFCVM)- coating rated BEST for latex ink
- available in 30–60" rolls this printer accepts
- 3" core supported
- 15.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image225gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–54" rolls this printer accepts
- 3" core supported
- 9.5 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image15 Mil Textured Co-polymer Laminate- coating rated BEST for latex ink
- available as 51" roll
- 3" core supported
- 15.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageKODAK Premium Photo Paper, Satin / 10 Mil / Solvent (Pallet Only)- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image180gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–61" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image5 Mil Polycarbonate Laminate- coating rated BEST for latex ink
- available in 38–51" rolls this printer accepts
- 3" core supported
- 5.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image200gsm Special Matte Photo Paper- coating rated BEST for latex ink
- available in 24–36" rolls this printer accepts
- 3" core supported
- 9.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
36 more recommended rolls fit this machine — browse all paper & media.
Also stocked for this machine
These come from the supply list wired to this machine rather than the media-handling match, so there is no per-roll fit note to show.
Also compatible
These load and run, but the coating is not the manufacturer's optimal match for this ink.
Representative image20LB Engineering Bond Paper (430)- coating rated GOOD for latex ink
- available in 11–60" rolls this printer accepts
- 3" core supported
- 4.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageHP Double-sided Blockout Banner- coating rated GOOD for latex ink
- available in 38–63" rolls this printer accepts
- 3" core supported
- 13.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageMagic 10mil Gloss Microporous Photo Paper (SIENA250G)- coating rated GOOD for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative image24LB Inkjet Bond Paper (731)- coating rated GOOD for latex ink
- available in 11–44" rolls this printer accepts
- 2/3" core supported
- 4.7 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageHP Prime Gloss CP- coating rated GOOD for latex ink
- available in 54–60" rolls this printer accepts
- 3" core supported
- 3.4 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imagePoly Fabric- coating rated COMPATIBLE for latex ink
- available in 36–60" rolls this printer accepts
- 2/3" core supported
- 8.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
- vendor rates this coating compatible, not optimal, for this ink
Representative imageMagic 8mil Microporous Gloss Photo Paper (SIENA200G)- coating rated GOOD for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- 8.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageHP PVC-Free Blockout Banner (Pallet Only)- coating rated GOOD for latex ink
- available in 38–63" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Representative imageMagic 10mil Satin Microporous Photo Paper (SIENA250L)- coating rated GOOD for latex ink
- available in 17–60" rolls this printer accepts
- 3" core supported
- 10.0 mil caliper within this printer's media path
- core sizes derived from printer class, not yet verified
Printheads
Accessories
Frequently asked questions
- Which ink cartridges fit the HP Latex FS60?
- The HP Latex FS60 takes HP 883 5-liter Black Latex Ink Cartridge, HP 883 5-liter Cyan Latex Ink Cartridge, HP 883 5-liter Light Cyan Latex Ink Cartridge, HP 883 5-liter Light Magenta Latex Ink Cartridge, HP 883 5-liter Magenta Latex Ink Cartridge, HP 883 5-liter Optimizer Latex Ink Cartridge, HP 883 5-liter Overcoat Latex Ink Cartridge, HP 883 5-liter Yellow Latex Ink Cartridge, HP 883M 5-liter Magenta Latex Ink Cartridge and HP Latex 2700/FS Ink Collector Foams Kit and 4 other genuine cartridges. Every cartridge listed on this page comes from the manufacturer's supply listing for this model.
- What roll widths and core sizes does the HP Latex FS60 take?
- It takes rolls up to 126 in wide. The spindle holds a finished roll up to 400 mm in diameter, which is what separates a 150 ft roll from a 300 ft roll of the same paper.
- Does the HP Latex FS60 use dye or pigment ink?
- The HP Latex FS60 runs latex ink. Latex ink is water-based with a polymer binder cured by heat, so prints come off the machine dry and odour-free.
- What paper can I use in the HP Latex FS60?
- We hold 130 paper and media products verified against this machine, 54 of them at the recommended tier, where compatibility is resolved from the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. The rest come from the supply list the manufacturer publishes for this machine. Either way a roll only appears here if a source says it fits.
- Do you sell printheads for the HP Latex FS60?
- Yes — 1 genuine printhead product for this model is listed above. If you are not sure which channel has failed, call 980-536-0080 and we will work it out from the machine's error code.
Not sure which supply you need?
Tell us the model and what you are printing and we will confirm the right cartridge or roll before you order. Call 980-536-0080 or send us the details.
Red Circle Solutions LLC · 110 Exmore Rd Suite 2, Mooresville NC 28117










