Supplies hub
HP Latex 310 Ink & Paper
Everything that fits the HP Latex 310 in one place — 24 ink cartridges, 4 printheads, 101 paper & media options, 4 accessories. Cartridges and printheads come from the manufacturer's own supply listing for this model; the paper list is resolved from the machine's published media handling, not a marketing list.
- Core3 in
- Max roll dia.180 mm
- InkLatex
The machine: HP Latex 310 Printer
HP Latex 310 Ink Cartridges
The HP Latex 310 runs latex ink. Only the cartridges the manufacturer lists for this model appear here.
HP 831 775-ml Latex Optimizer Ink Cartridge
HP 831 775-ml Latex Optimizer Ink Cartridge
HP 831 Latex Maintenance Cartridge
HP 831A 775-ml Black Latex Ink Cartridge
HP 831A 775-ml Black Latex Ink Cartridge
HP 831A 775-ml Cyan Latex Ink Cartridge
HP 831A 775-ml Cyan Latex Ink Cartridge
HP 831A 775-ml Light Cyan Latex Ink Cartridge
HP 831A 775-ml Light Cyan Latex Ink Cartridge
HP 831A 775-ml Light Magenta Latex Ink Cartridge
HP 831A 775-ml Light Magenta Latex Ink Cartridge
HP 831A 775-ml Magenta Latex Ink Cartridge
HP 831A 775-ml Magenta Latex Ink Cartridge
HP 831A 775-ml Yellow Latex Ink Cartridge
HP 831A 775-ml Yellow Latex Ink Cartridge
HP 831B 775-ml Light Cyan Latex Ink Cartridge
HP 831C 775-ml Black Latex Ink Cartridge
HP 831C 775-ml Cyan Latex Ink Cartridge
HP 831C 775-ml Light Cyan Latex Ink Cartridge
HP 831C 775-ml Light Magenta Latex Ink Cartridge
HP 831C 775-ml Magenta Latex Ink Cartridge
HP 831C 775-ml Yellow Latex Ink Cartridge
HP Latex 54 Cutting Solution
HP Latex 64 Cutting SolutionPaper & Media for the HP Latex 310
The recommended and compatible rolls below were checked against the HP Latex 310's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink.
Recommended for this printer
Representative image10 Mil Water-resistant Blockout Display Film- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image10 Mil White Opaque Backer- coating rated BEST for latex ink
- available as 38" roll
- 3" core supported
- the 75 ft roll winds to about 4.5 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image11 Mil Water-Resistant Synthetic Banner- coating rated BEST for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- the 60 ft roll winds to about 4.4 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image180gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–61" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.6 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image200gsm Special Matte Photo Paper- coating rated BEST for latex ink
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image225gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–54" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image230gsm Special Matte Photo Paper- coating rated BEST for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image3 Mil Fusion Finesse Polypropylene Laminate- coating rated BEST for latex ink
- available as 51" roll
- 3" core supported
- the 150 ft roll winds to about 4.0 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image8mil Poster Paper Satin (514)- coating rated BEST for latex ink
- available in 36–54" rolls this printer accepts
- 3" core supported
- the 200 ft roll winds to about 5.8 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageEmbossed Indoor Floor & Wall Vinyl- coating rated BEST for latex ink
- available as 54" roll
- 3" core supported
- the 100 ft roll winds to about 4.2 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image5 Mil Water-Resistant Self-Adhesive Vinyl (3" AC)- coating rated BEST for latex ink
- available as 60" roll
- 3" core supported
- the 60 ft roll winds to about 3.7 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image10 Mil Water-resistant Blockout Display Film- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 230gsm Premium Matte Paper (PHOTOART230)- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 5.0 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image225gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–54" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageKODAK Premium Photo Paper, Satin / 10 Mil / Solvent (Pallet Only)- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image180gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–61" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.6 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image5 Mil Polycarbonate Laminate- coating rated BEST for latex ink
- available in 38–51" rolls this printer accepts
- 3" core supported
- the 150 ft roll winds to about 4.5 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image200gsm Special Matte Photo Paper- coating rated BEST for latex ink
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
23 more recommended rolls fit this machine — browse all paper & media.
Also stocked for this machine
These come from the supply list wired to this machine rather than the media-handling match, so there is no per-roll fit note to show.
Also compatible
These load and run, but the coating is not the manufacturer's optimal match for this ink.
Representative imageMagic 8mil Microporous Gloss Photo Paper (SIENA200G)- coating rated GOOD for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.6 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image20LB Engineering Bond Paper (430)- coating rated GOOD for latex ink
- available in 11–60" rolls this printer accepts
- 3" core supported
- the 650 ft roll winds to about 7.0 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 10mil Gloss Microporous Photo Paper (SIENA250G)- coating rated GOOD for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image24LB Inkjet Bond Paper (731)- coating rated GOOD for latex ink
- available in 11–44" rolls this printer accepts
- 3" core supported
- the 300 ft roll winds to about 5.5 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageHP Prime Gloss CP- coating rated GOOD for latex ink
- available in 54–60" rolls this printer accepts
- 3" core supported
- the 150 ft roll winds to about 4.1 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imagePoly Fabric- coating rated COMPATIBLE for latex ink
- available in 36–60" rolls this printer accepts
- 3" core supported
- the 150 ft roll winds to about 5.2 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageHP PVC-Free Blockout Banner (Pallet Only)- coating rated GOOD for latex ink
- available in 38–63" rolls this printer accepts
- 3" core supported
- the 164 ft roll winds to about 5.8 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 10mil Satin Microporous Photo Paper (SIENA250L)- coating rated GOOD for latex ink
- available in 17–60" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imagePaperTyger 53# PaperTyger Laser/Inkjet (470)- coating rated GOOD for latex ink
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 7.1 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Printheads
Accessories
Frequently asked questions
- Which ink cartridges fit the HP Latex 310?
- The HP Latex 310 takes HP 831 775-ml Latex Optimizer Ink Cartridge, HP 831 775-ml Latex Optimizer Ink Cartridge, HP 831 Latex Maintenance Cartridge, HP 831A 775-ml Black Latex Ink Cartridge, HP 831A 775-ml Black Latex Ink Cartridge, HP 831A 775-ml Cyan Latex Ink Cartridge, HP 831A 775-ml Cyan Latex Ink Cartridge, HP 831A 775-ml Light Cyan Latex Ink Cartridge, HP 831A 775-ml Light Cyan Latex Ink Cartridge and HP 831A 775-ml Light Magenta Latex Ink Cartridge and 14 other genuine cartridges. Every cartridge listed on this page comes from the manufacturer's supply listing for this model.
- What roll widths and core sizes does the HP Latex 310 take?
- On 3 in cores. The spindle holds a finished roll up to 180 mm in diameter, which is what separates a 150 ft roll from a 300 ft roll of the same paper.
- Does the HP Latex 310 use dye or pigment ink?
- The HP Latex 310 runs latex ink. Latex ink is water-based with a polymer binder cured by heat, so prints come off the machine dry and odour-free.
- What paper can I use in the HP Latex 310?
- We hold 101 paper and media products verified against this machine, 41 of them at the recommended tier, where compatibility is resolved from the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. The rest come from the supply list the manufacturer publishes for this machine. Either way a roll only appears here if a source says it fits.
- Do you sell printheads for the HP Latex 310?
- Yes — 4 genuine printhead products for this model are listed above. If you are not sure which channel has failed, call 980-536-0080 and we will work it out from the machine's error code.
Not sure which supply you need?
Tell us the model and what you are printing and we will confirm the right cartridge or roll before you order. Call 980-536-0080 or send us the details.
Red Circle Solutions LLC · 110 Exmore Rd Suite 2, Mooresville NC 28117







