Supplies hub
HP DesignJet T1600 Ink & Paper
Everything that fits the HP DesignJet T1600 in one place — 12 ink cartridges, 116 paper & media options, 3 accessories. Cartridges and printheads come from the manufacturer's own supply listing for this model; the paper list is resolved from the machine's published media handling, not a marketing list.
- Roll widthup to 36 in
- Core2 in
- Max roll dia.140 mm
- InkAqueous (dye + pigment)
Configurations of this machine: HP DesignJet T1600 36-in Printer · HP DesignJet T1600 PS Managed Printer, 36-in · HP DesignJet T1600 36-in PostScript Printer Plus Edition · HP DesignJet T1600 36-in Printer, Plus Edition · HP DesignJet T1600 36-in PostScript Printer, Plus Edition
HP DesignJet T1600 Ink Cartridges
The HP DesignJet T1600 runs aqueous (dye + pigment) ink. Only the cartridges the manufacturer lists for this model appear here.
130 ml6Add all 6 to cart $611.70
Paper & Media for the HP DesignJet T1600
The recommended and compatible rolls below were checked against the HP DesignJet T1600's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. This machine takes rolls up to 36 in wide on 2 in cores.
Recommended for this printer
Representative image10 Mil Water-resistant Blockout Display Film- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image180gsm Solvent Satin PE Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.6 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image200gsm Special Matte Photo Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image24LB Inkjet Bond Paper (731)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 11–36" rolls this printer accepts
- 2/3" core supported
- the 300 ft roll winds to about 5.5 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image5 Mil Water-Resistant Self-Adh Vinyl (3" AC)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 2/3" core supported
- the 60 ft roll winds to about 3.7 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image6.5mil Matte Coated Paper w/ PSA (746PSA)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 2/3" core supported
- the 100 ft roll winds to about 4.4 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image8 Mil Microporous Gloss Self-Adhesive Polypropylene- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 2" core supported
- the 100 ft roll winds to about 3.8 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image10 Mil Water-resistant Blockout Display Film- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image180gsm Solvent Satin PE Paper- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.6 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imageEveryday Proofing (GRACoL 2013) (EV260)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imageHP Bright White Inkjet Paper, 2-pack- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 2" core supported
- the 300 ft roll winds to about 5.1 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 230gsm Premium Matte Paper (PHOTOART230)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 5.0 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 10mil Satin Microporous Photo Paper (SIENA250L)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 17–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imagePoly Fabric- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 2/3" core supported
- the 150 ft roll winds to about 5.2 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
HP Permanent Gloss Adhesive Vinyl- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available as 36" roll
- 3" core supported
- the 150 ft roll winds to about 4.0 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 8mil Microporous Gloss Photo Paper (SIENA200G)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.6 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 6mil PP Film w/ Low-Tack Adhesive (STICK2)- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image8 Mil Water-Resistant Polypropylene- coating rated for both the dye colour and pigment black this printer uses (best for both)
- available in 24–36" rolls this printer accepts
- 2/3" core supported
- fits in up to 100 ft lengths; longer rolls exceed the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
68 more recommended rolls fit this machine — browse all paper & media.
Also stocked for this machine
These come from the supply list wired to this machine rather than the media-handling match, so there is no per-roll fit note to show.
Also compatible
These load and run, but the coating is not the manufacturer's optimal match for this ink.
Representative image20LB Engineering Bond Paper (430)- coating rated for both the dye colour and pigment black this printer uses
- available in 11–36" rolls this printer accepts
- 3" core supported
- fits in up to 330 ft lengths; longer rolls exceed the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
Representative imageKODAK Photo Tex Repositionable Fabric / Aqueous- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imagePaperTyger 53# PaperTyger Laser/Inkjet (470)- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
HP Professional Satin Photo Paper- coating rated for both the dye colour and pigment black this printer uses
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
HP Everyday Satin Photo Paper- coating rated for both the dye colour and pigment black this printer uses
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.5 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imageKODAK Rapid-Dry Photographic Satin Paper 190g (8 Mil)- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 2" core supported
- the 100 ft roll winds to about 4.0 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative image18LB Engineering Bond Paper (Translucent) (450)- coating rated for both the dye colour and pigment black this printer uses
- available in 15–36" rolls this printer accepts
- 2/3" core supported
- fits in 500 ft lengths; longer rolls exceed the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
Representative image4mil Inkjet Clear Film (497)- coating rated for both the dye colour and pigment black this printer uses
- available in 17–36" rolls this printer accepts
- 2" core supported
- the 100 ft roll winds to about 3.2 in — inside the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
- printer thickness limit unverified (thin media, low risk)
Representative imagePaperTyger 27# PaperTyger Laser/Inkjet (467)- coating rated for both the dye colour and pigment black this printer uses
- available in 24–36" rolls this printer accepts
- 2/3" core supported
- fits in up to 200 ft lengths; longer rolls exceed the 5.5 in roll this printer holds
- core sizes derived from printer class, not yet verified
Accessories
Coverage & Support
HP 1 year Post Warranty NBD Onsite HW Support w/Defective Media Retention for T1600 1 roll
HP 4 year Next Business Day Onsite HW Support w/Defective Media Retention for T1600 1 roll
HP Network Installation Service for High-end and Midrange
HP Preventive Maintenance Hardware Support (U1XV4E)
Hp 3 Year Next Business Day Onsite Hardware Support W/Dmr For T1600 1 (UC6M2E)
Hp 3 Year Next Business Day Onsite Hardware Support W/Dmr For T1600 2 (UC6N0E)
Hp 3 Year Next Business Day Onsite Hw Support W/Defective Media Retention For De (UB8P0E)
Hp 4 Year Next Business Day Onsite Hardware Support W/Dmr For T1600 1 (UC6M3E)
Hp 4 Year Next Business Day Onsite Hardware Support W/Dmr For T1600 2 (UC6N1E)
Hp 5 Year Next Business Day Onsite Hardware Support W/Dmr For T1600 1 (UC6M4E)
Hp 5 Year Next Business Day Onsite Hardware Support W/Dmr For T1600 2 (UC6N2E)
Hp 5 Year Next Business Day Onsite Hw Support W/Defective Media Retention For De (UB8P2E)Frequently asked questions
- Which ink cartridges fit the HP DesignJet T1600?
- The HP DesignJet T1600 takes HP 730 130-ml Cyan DesignJet Ink Cartridge, HP 730 130-ml Gray DesignJet Ink Cartridge, HP 730 130-ml Magenta DesignJet Ink Cartridge, HP 730 130-ml Matte Black DesignJet Ink Cartridge, HP 730 130-ml Photo Black DesignJet Ink Cartridge, HP 730 130-ml Yellow DesignJet Ink Cartridge, HP 730 300-ml Cyan DesignJet Ink Cartridge, HP 730 300-ml Gray DesignJet Ink Cartridge, HP 730 300-ml Magenta DesignJet Ink Cartridge and HP 730 300-ml Matte Black DesignJet Ink Cartridge and 2 other genuine cartridges. Every cartridge listed on this page comes from the manufacturer's supply listing for this model.
- What roll widths and core sizes does the HP DesignJet T1600 take?
- It takes rolls up to 36 in wide on 2 in cores. The spindle holds a finished roll up to 140 mm in diameter, which is what separates a 150 ft roll from a 300 ft roll of the same paper.
- Does the HP DesignJet T1600 use dye or pigment ink?
- The HP DesignJet T1600 runs aqueous (dye + pigment) ink. This machine runs a mixed set — pigment for durability in some channels, dye for colour reach in others.
- What paper can I use in the HP DesignJet T1600?
- We hold 116 paper and media products verified against this machine, 86 of them at the recommended tier, where compatibility is resolved from the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. The rest come from the supply list the manufacturer publishes for this machine. Either way a roll only appears here if a source says it fits.
- How do you know these supplies fit the HP DesignJet T1600?
- Nothing on this page is matched by model name alone: the cartridges and printheads come from the manufacturer's own published supply listing for this exact model and each paper and media roll is checked against the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. If a part is not listed here, it has not been verified for this machine — call 980-536-0080 and we will check it before you order.
Not sure which supply you need?
Tell us the model and what you are printing and we will confirm the right cartridge or roll before you order. Call 980-536-0080 or send us the details.
Red Circle Solutions LLC · 110 Exmore Rd Suite 2, Mooresville NC 28117














