Supplies hub
HP Latex R530 Ink & Paper
Everything that fits the HP Latex R530 in one place — 9 ink cartridges, 101 paper & media options, 1 accessory. Cartridges and printheads come from the manufacturer's own supply listing for this model; the paper list is resolved from the machine's published media handling, not a marketing list.
- Core3 in
- Max roll dia.250 mm
- InkLatex
Configurations of this machine: HP Latex R530 Printer – 64-in (3-Year Warranty) · HP Latex R530 Printer
HP Latex R530 Ink Cartridges
The HP Latex R530 runs latex ink. Only the cartridges the manufacturer lists for this model appear here.
HP 873 3-liter Black Latex Ink Cartridge
HP 873 3-liter Cyan Latex Ink Cartridge
HP 873 3-liter Light Cyan Latex Ink Cartridge
HP 873 3-liter Light Magenta Latex Ink Cartridge
HP 873 3-liter Magenta Latex Ink Cartridge
HP 873 3-liter Optimizer Latex Ink Cartridge
HP 873 3-liter Overcoat Latex Ink Cartridge
HP 873 3-liter White Latex Ink Cartridge
HP 873 3-liter Yellow Latex Ink CartridgePaper & Media for the HP Latex R530
The recommended and compatible rolls below were checked against the HP Latex R530's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink.
Recommended for this printer
Representative image10 Mil Water-resistant Blockout Display Film- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image10 Mil White Opaque Backer- coating rated BEST for latex ink
- available as 38" roll
- 3" core supported
- the 75 ft roll winds to about 4.5 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image11 Mil Water-Resistant Synthetic Banner- coating rated BEST for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- the 60 ft roll winds to about 4.4 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image180gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–61" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.6 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image200gsm Special Matte Photo Paper- coating rated BEST for latex ink
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image225gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–54" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image230gsm Special Matte Photo Paper- coating rated BEST for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image3 Mil Fusion Finesse Polypropylene Laminate- coating rated BEST for latex ink
- available as 51" roll
- 3" core supported
- the 150 ft roll winds to about 4.0 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image8mil Poster Paper Satin (514)- coating rated BEST for latex ink
- available in 36–54" rolls this printer accepts
- 3" core supported
- the 200 ft roll winds to about 5.8 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageEmbossed Indoor Floor & Wall Vinyl- coating rated BEST for latex ink
- available as 54" roll
- 3" core supported
- the 100 ft roll winds to about 4.2 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image5 Mil Water-Resistant Self-Adhesive Vinyl (3" AC)- coating rated BEST for latex ink
- available as 60" roll
- 3" core supported
- the 60 ft roll winds to about 3.7 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image10 Mil Water-resistant Blockout Display Film- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 230gsm Premium Matte Paper (PHOTOART230)- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 5.0 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image225gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–54" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageKODAK Premium Photo Paper, Satin / 10 Mil / Solvent (Pallet Only)- coating rated BEST for latex ink
- available as 36" roll
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image180gsm Solvent Satin PE Paper- coating rated BEST for latex ink
- available in 36–61" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.6 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image5 Mil Polycarbonate Laminate- coating rated BEST for latex ink
- available in 38–51" rolls this printer accepts
- 3" core supported
- the 150 ft roll winds to about 4.5 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image200gsm Special Matte Photo Paper- coating rated BEST for latex ink
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
23 more recommended rolls fit this machine — browse all paper & media.
Also stocked for this machine
These come from the supply list wired to this machine rather than the media-handling match, so there is no per-roll fit note to show.
Also compatible
These load and run, but the coating is not the manufacturer's optimal match for this ink.
Representative image20LB Engineering Bond Paper (430)- coating rated GOOD for latex ink
- available in 11–60" rolls this printer accepts
- 3" core supported
- the 650 ft roll winds to about 7.0 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 10mil Gloss Microporous Photo Paper (SIENA250G)- coating rated GOOD for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative image24LB Inkjet Bond Paper (731)- coating rated GOOD for latex ink
- available in 11–44" rolls this printer accepts
- 3" core supported
- the 300 ft roll winds to about 5.5 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageHP Prime Gloss CP- coating rated GOOD for latex ink
- available in 54–60" rolls this printer accepts
- 3" core supported
- the 150 ft roll winds to about 4.1 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imagePoly Fabric- coating rated COMPATIBLE for latex ink
- available in 36–60" rolls this printer accepts
- 3" core supported
- the 150 ft roll winds to about 5.2 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 8mil Microporous Gloss Photo Paper (SIENA200G)- coating rated GOOD for latex ink
- available in 24–60" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.6 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageHP PVC-Free Blockout Banner (Pallet Only)- coating rated GOOD for latex ink
- available in 38–63" rolls this printer accepts
- 3" core supported
- the 164 ft roll winds to about 5.8 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imageMagic 10mil Satin Microporous Photo Paper (SIENA250L)- coating rated GOOD for latex ink
- available in 17–60" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.9 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Representative imagePaperTyger 53# PaperTyger Laser/Inkjet (470)- coating rated GOOD for latex ink
- available in 24–36" rolls this printer accepts
- 3" core supported
- the 100 ft roll winds to about 4.8 in — inside the 9.8 in roll this printer holds
- printer roll-width unverified
- printer thickness limit unverified (thin media, low risk)
Accessories
Frequently asked questions
- Which ink cartridges fit the HP Latex R530?
- The HP Latex R530 takes HP 873 3-liter Black Latex Ink Cartridge, HP 873 3-liter Cyan Latex Ink Cartridge, HP 873 3-liter Light Cyan Latex Ink Cartridge, HP 873 3-liter Light Magenta Latex Ink Cartridge, HP 873 3-liter Magenta Latex Ink Cartridge, HP 873 3-liter Optimizer Latex Ink Cartridge, HP 873 3-liter Overcoat Latex Ink Cartridge, HP 873 3-liter White Latex Ink Cartridge and HP 873 3-liter Yellow Latex Ink Cartridge. Every cartridge listed on this page comes from the manufacturer's supply listing for this model.
- What roll widths and core sizes does the HP Latex R530 take?
- On 3 in cores. The spindle holds a finished roll up to 250 mm in diameter, which is what separates a 150 ft roll from a 300 ft roll of the same paper.
- Does the HP Latex R530 use dye or pigment ink?
- The HP Latex R530 runs latex ink. Latex ink is water-based with a polymer binder cured by heat, so prints come off the machine dry and odour-free.
- What paper can I use in the HP Latex R530?
- We hold 101 paper and media products verified against this machine, 41 of them at the recommended tier, where compatibility is resolved from the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. The rest come from the supply list the manufacturer publishes for this machine. Either way a roll only appears here if a source says it fits.
- How do you know these supplies fit the HP Latex R530?
- Nothing on this page is matched by model name alone: the cartridges and printheads come from the manufacturer's own published supply listing for this exact model and each paper and media roll is checked against the printer's published media handling — roll width, core size, the roll diameter the spindle holds and the coating's rating for this machine's ink. If a part is not listed here, it has not been verified for this machine — call 980-536-0080 and we will check it before you order.
Not sure which supply you need?
Tell us the model and what you are printing and we will confirm the right cartridge or roll before you order. Call 980-536-0080 or send us the details.
Red Circle Solutions LLC · 110 Exmore Rd Suite 2, Mooresville NC 28117
