Home / Paper & Media / Bond & Coated
HP · Paper & Media
20 lb Engineering Bond Paper Pink Tinted
- Model432P
Representative imageA generic photograph of wide-format roll media and our shipping carton. It is not a photograph of this product, and it does not show the pack quantity, roll length, width or colour you are ordering — those are in the title and the size options below.
Genuine OEM hardwareAuthorized U.S. distribution
Manufacturer warrantyExtension plans available
Free shippingContinental U.S.
Plotter specialistsAEC experts, not just sellers
Specifications
Dye· GOODPigment· GOODLatex· GOODUV· GOODPageWide· BESTToner LED· BEST3″ core
The pink tint in Dietzgen's 432 tinted bond family: 20 lb (75 gsm), 4 mil, matte, 92 brightness, 88% opacity. It prints and handles exactly like the untinted engineering bond, with the same BEST ratings for toner and HP PageWide. Rolls 11 to 36 inches, plus 17 and 18 inch cut sheets.
| Media type | Bond & Uncoated › Tinted Bond |
|---|---|
| Finish | Matte |
| Thickness | 4 mil |
| Weight | 75 gsm (20 lb bond) |
| Core size | 3" core |
Overview
Built for the work
The pink tint in Dietzgen's 432 tinted bond family: 20 lb (75 gsm), 4 mil, matte, 92 brightness, 88% opacity. It prints and handles exactly like the untinted engineering bond, with the same BEST ratings for toner and HP PageWide. Rolls 11 to 36 inches, plus 17 and 18 inch cut sheets.
Expert analysis
What you should know
Dietzgen 432P is the pink tint in Dietzgen’s 432 tinted production bond range: 20 lb (75 gsm), 4 mil, matte, with a smooth surface measuring 92 brightness and 88% opacity. It is the standard engineering bond body stock with colour added — the specification is otherwise unchanged.
What Dietzgen 20LB Engineering Bond Paper Pink Tinted (432P) is used for
- Tinted everyday production plotting (green / blue / pink / yellow)
- High-volume reprographics runs
- Check prints and hand-marked redlines
- Stapled or bound plan sets
Nothing in Dietzgen’s data assigns a job to the pink sheet specifically. Tints exist so that a print can be identified at a glance in a stack, and the convention for what each colour means belongs to the office that adopts it. Beyond that this is ordinary production stock: it takes pen and pencil for redlines and hand notes, and it runs through common stapling and binding equipment when sets are collated by hand.
Ink compatibility
Rated BEST for toner and BEST for HP PageWide, with aqueous dye, aqueous pigment, latex and UV inks each rated GOOD. Those are the same ratings the untinted 20 lb bond carries, so switching a roll for a tinted one implies no change of print settings.
Working with it
Overlamination is not required. Pressure-sensitive, heat-assist and thermal overlaminates are compatible where a print needs surface protection from dirt, abrasion and moisture. At 88% opacity, print one side. Pink is stocked in both forms: rolls from 11 to 36 inches wide on 3-inch cores, and cut sheets in 17 and 18 inch widths. Roll and sheet availability differs between the four tints, so confirm the size in the colour you want.
Specifications
Full technical detail
Ready to put the 20 lb Engineering Bond Paper Pink Tinted to work?
Configuration, media and a quote tailored to your workflow — from AEC plotter specialists.